The value of good furniture is that it serves its user for a long while. No one is pleased with buying a piece or set of furniture that they have to re-work, more so, frequently. It is one thing for a piece of furniture to develop constant faults; it is another thing for an item of furniture to be restored after a minor fault. The latter is a good value of furniture, which should be desired while the former shows a weak piece of furniture. When your piece of furniture is fixed and restored, it should take you through another lasting season. So, let’s say you have the latter -a really good piece of furniture that is faulty- and you want to restore it, what should you do? Here are some tips that would guide you through to fix your used office furniture Houston

For minor faults that require fixing, here is what to do:

Confirm your repair checklist: 

There are things you will certainly need for some minor repairs; check your supply kit to be sure you have all you need before you proceed. You should have basic tools like hammer, screwdrivers, chemical-resistant gloves, paint and brush, bucket, sandpaper, wood sealant, tape, and other things that you might consider helpful. 

Now, you can proceed to work on:

Loose Hinges: For loose hinges, all that is required may be to nail down a slacking piece of nail or to hold the joint with another piece of nail. For places with screws, check if the screws are in place or if they require to be retightened. 

Cracks: Nail or screw one side of a cracked piece of furniture into the other. If it is a minor crack that only defaces your furniture, you can apply wax over it or find a blending paint to cover it up.

Old looking piece: Characteristically, a good piece of furniture would endure time and while it does, the color shade on its surface may have changed or faded. In such an instance, a proper surface cleaning coupled with waxing will brighten up the furniture again.

Refinishing a wood

If you want to go ahead to refinish a wood surface there are three things to do.

Cleaning: Get the piece to be as clean as possible. The easiest and most effective way to start cleaning is by using a piece of cloth dipped into a soapy water solution.

Sand off the surface: When assured that the surface is clean then you can remove the old finish by sanding it off with coarse sandpaper, sanding block or a power sander or use a chemical stripper until it is smooth.

Add finish: Cover up the surface with your desired paint. For organic furniture, you may want to retain the original look and feel. Just be sure it is what you want to do.

These are the most common issues that many are willing to try out by themselves. For complications such as large disjointed parts, it is better to reach out to a repairman who restores used office furniture; Houston has a handful of them. Work on your budget, find a trusted used office furniture repairer, and let them have your furniture fixed. 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *